What should be paid attention to during the operation of the gas boiler?

       The combustion efficiency of gas boilers is relatively high, and its operation methods must be mastered.The performance advantages of the entire gas boiler equipment are relatively obvious. When operating, you must understand its precautions.So, what should be paid attention to in the operation of gas boilers?

       During the operation of the entire gas boiler, positive pressure combustion or furnace smoke spraying is not allowed, which may damage the coal hole cover, and the bottom of the gas boiler should not accumulate water, it must be dry and clean, and it must be well protected from moisture, corrosion and corrosion. Moisture-proof, these are more important.In addition, after the entire gas boiler equipment has been running for a period of time, it must be checked every 2-3 weeks.

       When the gas boiler equipment runs for 3-6 months, be sure to stop using it and conduct a comprehensive inspection and maintenance. These are more important. It is necessary to stop the operation of the boiler and conduct a comprehensive inspection and maintenance, including the welding of the pressure part. If there is any serious defect, it must be repaired in time. If the defect is not serious, the furnace can be stopped to repair the road, and there is something suspicious, but it does not affect the safety. If so, keep a record for future reference.

       After the inspection, the boiler primer can be applied on the water surface. This is more important, which can play a role in anti-corrosion. The entire gas boiler and the boiler base can be painted.The maintenance methods for gas boilers that are not used for a long time include dry method and wet method. The maintenance method can be selected according to actual needs.Generally speaking, the dry maintenance method is to clean the internal dirt after shutting down the boiler for water discharge. It can be dried in the furnace with a small fire, and then installed in a 10-30 mm block of quicklime. It should be placed in the drum so that it will not be in contact with lime and metal, and all manholes and handhole pipeline valves can be closed, and inspected every three months.