The flue gas of waste heat boiler contains volatile sulfide and combustible materials, which will further complete the chemical reaction and release heat. Chemical reaction heat is fully considered in the design of waste heat boiler to meet the needs of production process. According to the flue temp

The waste heat boiler usually has high dust content and wear problem, which seriously affects the service life of the boiler. Considering this problem, on the one hand, we use thick-walled tubes for the heating surface of our boiler to improve the strength of the tubes. On the other hand, we reasona

Jiangsu Sifang Boiler Co., Ltd. was established in 1998, and is the first ASME accredited special equipment manufacturing enterprise of China Special Equipment Inspection and Research Institute. Through technological and innovative development, our company has become the leading boiler industry in C

Sifang now has advanced drum production lines, header production lines, membrane wall production lines and serpentine pipe production lines, including CNC four roll bending machines, CNC blanking, large porous CNC drilling machines, CNC bevel machines, plasma cutting machines, various welding machin

The inlet and outlet flue of the waste heat boiler is provided with expansion joints to absorb the expansion of various components of the boiler. Moreover, the boiler body is equipped with expansion guide device to ensure the free expansion of the furnace body, limit the displacement and prevent the

The waste heat boiler uses the sensible heat in the waste gas, waste or waste liquid in the industrial process or (and) the heat generated after the combustion of its combustible substances to heat the water to a certain temperature and provide hot water or steam for other sections, which greatly im

Corner Tube Boiler refers to the boiler supported by angle pipes (large-diameter downcomers) set at its four corners, with the drum arranged horizontally at the top of the boiler front wall, and the whole is a full membrane wall structure, which means a closed water-cooled structure is formed around

The membrane water wall of the boiler adopts fully welded structure, which has good sealing and no air leakage, reduces the excess air coefficient of flue gas and reduces the loss q2 of flue gas; The heavy refractory brick and red brick wall structure used in traditional industrial boilers is change

The membrane water wall of the boiler adopts fully welded structure, which has good sealing and no air leakage, reduces the excess air coefficient of flue gas and reduces the loss q2 of flue gas; The heavy refractory brick and red brick wall structure used in traditional industrial boilers is change

Classification of boiler burnersThe outer wall of the boiler uses light insulation material, and the outer cover is model slab, which has good heat insulation effect. There is no brick in the inner and outer wall of the boiler, and its no steel frame structure can greatly reduce the weight of the bo

Tail heating surface:(1) Equal flow velocity variable cross-section design of the tail heating surface to ensure that the minimum smoke velocity of the flag heating surface is more than 6m/s.(2) The tail heating surface of each stage is reserved for soot blower interface and installation of soot blo

Our corner tube boiler has a fully enclosed membrane wall structure, with good sealing and small air leakage coefficient of the boiler. The boiler body adopts the latest round furnace door. The furnace door is an embedded furnace door, which is welded with the membrane wall around. It has good seali