When the steam boiler produces saturated steam, due to some reasons of the steam boiler itself, the steam contains water, resulting in insufficient dryness of the steam and water in the saturated steam. In this paper, Jiangsu Sifang boiler briefly analyzes the main reasons.The main reasons are as fo

The economizer of the boiler is generally arranged in the tail flue, and the flue gas temperature is low. When the industrial boiler is started or operated under low working conditions, it is easy to cause the flue gas temperature to be low, thus causing low-temperature corrosion of the tail heating

In recent years, with the expansion of coal application scope and the enhancement of people's environmental protection awareness, circulating fluidized bed boiler, as a main "clean combustion" device, has been widely used, which shows its strong development momentum. For the selection of wear-resist

Established in 1998, Jiangsu Sifang Boiler Co., Ltd. is the first ASME accredited special equipment manufacturing enterprise of China Special Equipment Inspection and Research Institute. Through technological and innovative development, our company has become the leading boiler industry in China.The

In view of this problem, Jiangsu Sifang boiler suggests:1) When the distance from the site to the control room is long and the resistance of the connecting wire is large, if the voltage source signal is used for remote transmission, a large error will occur due to the voltage division between the wi

In response to this question, Jiangsu Sifang boiler replied:The PVC valve is mainly opened automatically according to the set pressure when the main steam pressure is high. The function is direct. The superheated steam is directly discharged to the atmosphere without temperature reduction. The metho

We have the manufacturing license of Class A boiler and Class A1 pressure vessel, ASME certification qualification, boiler installation, alteration, repair and maintenance license, and have passed IO9001 quality management system certification, ISO14001 environmental management system certification,

The water and steam system of the boiler and its thermal cycle equipment includes a series of equipment pipes and their evaporation heating surfaces flowing from the raw water into the boiler, and the steam system of the superheated heating surfaces and their steam consuming equipment flowing from t

① Thermal typeThermal NOx is mainly generated during combustion. Nitrogen in combustion supporting air is oxidized under high-temperature flame. It is mainly generated in the area with temperature higher than 1800K. Temperature, excess air coefficient and residence time in high-temperature zone will

A) phenomenon of economizer damage accident (1) the water level of the drum drops abnormally, the water supply volume increases significantly, and is larger than the steam volume, and the water pressure at the economizer inlet decreases; (2) The exhaust gas temperature decreases and the water temper

NOx generation of natural gas boiler is mainly thermal NOx, which can be controlled by controlling combustion temperature. The main control methods are as follows:A) staged combustionStaged combustion refers to the combustion technology in which the air and fuel required for combustion are fed into

In the process of boiler water level control, the adjustment method that takes the drum water level as the feedback signal is called single impulse adjustment of boiler water level. Single impulse water level control is the simplest and most basic form of boiler drum water level automatic control.Th