The boiler is shipped in large pieces and assembled on site, which can shorten the installation cycle of the boiler and save the installation cost. The boiler has high thermal efficiency and easy operation, which greatly reduces the labor and electricity cost. As the boiler has no refractory brick w

Sifang Boiler adopts secondary air design. The main role of the secondary air is to disturb the airflow in the furnace and enhance mutual cooperation, so as to reduce the q3 and q4 heat loss without increasing the α. The use of the counter blowing of secondary air, can organize the vortex flow of fl

Our corner tube boiler has a fully enclosed membrane wall structure, with good sealing and small air leakage coefficient of the boiler. The boiler body adopts the latest round furnace door. The furnace door is an embedded furnace door, which is welded with the membrane wall around. It has good seali

The latest generation of sifang circulating fluidized bed boiler adopts the company’s new patented technology of funnel cap, with more uniform air distribution, stronger fluidization, no stratification of bed material, and effective prevention of ash dumping, with self-cleaning function of funnel ca

When designing low-pressure industrial boilers, manufacturers have already considered the issue of overheating efficiency, and it is unlikely to save energy by changing the equipment or flue gas. Therefore, it is best to start from the operation aspect for boiler energy conservation (the method of s

Boilers are essential equipment for developing the economy, industrial and agricultural production, and improving people's living standards and quality. Poor management can shorten the service life of boilers, increase energy consumption, cause accidents, increase maintenance costs, and prevent prod

Sifang waste heat boiler usually has high dust content and wear problem, which seriously affects the service life of the boiler. Considering this problem, on the one hand, we use thick-walled tubes for the heating surface of our boiler to improve the strength of the tubes. On the other hand, we reas